Hyundai Grand I10 B3694 Engine Error Code
When you check Hyundai Grand I10 car engine light came on code B3694 the reason should be . However Hyundai manufacturer may have a different definition for the B3694 OBD-II Diagnostic Body (B) Trouble Code. So you should chech it on our car models.
On 1999 and later B3694 Hyundai Grand I10 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
|
Hyundai Grand I10 B3694 OBD-II Diagnostic Body (B) Trouble Code Descriptionso you have to check ODB-II Engine Error Code list.Reason For Hyundai Grand I10 B3694 CodeThe reason of Hyundai Grand I10 B3694 OBD-II Engine Error Code is . |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. B3694 Hyundai Grand I10 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
Hyundai Grand I10 B3694 Possible Solution :
In-line Ford engines, along with those of most other manufacturers, begin the numbering of cylinders at the front and proceed in numerical order toward the back. In the V-engine design, Ford follows a similar design with the number one cylinder at the front left of the engine. In the V-6 configuration, cylinder 4 is at the front right of the engine and in a V-8, cylinder number 5 is in that location. Other manufacturers sometimes use an alternating pattern in the V-engines.
|
What does fault code B3694 mean for Hyundai Grand I10 ?
|